Concrete Grinding services in Anchor Bay Gardens, Michigan
We Are Locally Owned
& Operated For 36 Years
Contact Us Today!
About Concrete Grindings
Understanding Concrete Grinding
Concrete grinding is a process that involves using a specialized machine with abrasive surfaces to smooth and level concrete floors, both in residential and commercial properties. This procedure is essential in preparing a concrete surface for various finishes or coatings and is also sought-after for its ability to repair uneven slabs and mitigate trip hazards.
The Concrete Grinding Process
The concrete grinding process starts with an inspection of the concrete surface to identify any major flaws or undulations. High spots are ground down to create a level surface, and any cracks or imperfections can be filled or repaired. This is achieved through the use of diamond-impregnated disks, which work to grind down the concrete surface in a multi-step process involving various grit sizes, from coarse to very fine, to achieve the desired level of smoothness and polish.
Benefits of Concrete Grinding for Residential Properties
In residential settings, concrete grinding can transform a garage, basement, or any concrete floor, enhancing its aesthetics and longevity. It eliminates irregularities that accumulate over time, providing a clean and professional look. Additionally, residents benefit from reduced maintenance costs since ground concrete floors repel dust and dirt more effectively compared to unpolished surfaces and are easier to clean.
Benefits of Concrete Grinding for Commercial Properties
Commercial facilities prioritize durability and safety. Concrete grinding addresses these concerns by ensuring an even surface that is free of potential trip hazards. The process also enhances the sheen of commercial floors, boosting the light reflectivity which can lead to lower energy costs. It’s suitable for warehouses, showrooms, and any high-traffic area where flooring resilience and aesthetics are paramount.
Understanding Different Concrete Grinding Machines and Tools
For optimal results in concrete grinding floor, the selection of the right machines and tools is critical. Walk-behind concrete grinders are common for large areas, while handheld grinders are suitable for small spaces and detail work. Machines vary in their disc rotation speeds and pressure exerted on the surface, factors that must be matched to the scope and scale of the project to ensure efficiency and effectiveness.
Preparation Steps and Safety Measures
Before the concrete grinding process begins, it is necessary to secure the area, removing any furniture, debris, or impediments. It is also critical to have protective gear such as dust masks, goggles, and ear protection to safeguard against concrete dust and noise.
Concrete Grinding and Polishing Techniques
The attractiveness of a ground and polished concrete floor is undeniable. The process involves progressively grinding the concrete surface with finer and finer grit diamond impregnated pads. This is typically done wet to help minimize dust, although modern dust extraction systems have made dry grinding popular. Once the desired level of smoothness is achieved, a concrete hardener is often applied to densify the material, and the surface can then be polished to achieve a glossy, mirror-like finish.
Sealing and Maintenance of Ground Concrete
After grinding, applying a sealer to the concrete is vital to preserve its appearance and protect it against stains, wear, and moisture. There are various sealers to choose from, including epoxy, acrylic, and polyurethane coatings, each with unique characteristics catered to specific needs. Regular maintenance of ground and sealed concrete floors is straightforward, necessitating only occasional damp mopping with a neutral cleaner to maintain their luster and longevity.
Concrete Grinding for Leveling and Repair
Uneven concrete floors pose significant risks, especially in high-traffic environments. Concrete grinding is an efficient method to level out high spots and remedy uneven surfaces, thus preventing accidents and extending the floor’s lifespan. When it comes to repairing cracks and joints, a combination of grinding and filling techniques provides a smooth and cohesive surface, free from the imperfections that can cause further damage over time.
Incorporating Concrete Grinding into Your Next Renovation Project
For those considering home or business renovations, integrating concrete grinding into the project can dramatically enhance the look and functionality of your space. By preparing the floor for further treatment, whether it’s tile, carpet, or a polished concrete finish, you’re ensuring the longevity and performance of your investment.
Cost-Effectiveness of Concrete Grinding
Concrete grinding can be a cost-effective solution compared to other flooring options. Its long-term durability means reduced need for replacements, and its low-maintenance nature results in lower cleaning and upkeep expenses. Although the initial investment might be higher than other flooring treatments, the longevity and reduced lifecycle costs offset the initial expenditure, making it an economically sound choice for both residential and commercial property owners.
Why Choose a Professional for Concrete Grinding?
While the prospect of DIY concrete grinding might be tempting for some, the precision and safety requirements of the process make it a task best left to professionals. Experienced technicians come equipped with the right tools and knowledge to handle unexpected challenges that may arise during the grinding process. Professional service also includes assessment and recommendations on the best type of grind and sealing applications for the specific conditions of your concrete floor.
Contact Us for Your Concrete Grinding Needs
If you are looking to transform your concrete floors into smooth, polished surfaces that radiate sophistication, or need to level an uneven slab, our professional concrete grinding services are at your disposal. We combine advanced techniques with state-of-the-art equipment to deliver outstanding results. Reach out to us today to learn how we can bring a new lease of life to your residential or commercial floors with our expert concrete grinding solutions.
Contact Us Today for a FREE
Concrete Grinding Quote
About Anchor Bay Gardens, Michigan
History
Chesterfield Township was originally established as a general law township in 1842. It became a charter township in 1989.
The original European-American settlement in the area was a hamlet called Chesterfield, first settled in 1830. When the Grand Trunk Railway came through in 1865, it stimulated the development of businesses in the hamlet. It had a post office from 1875 until 1907, but has since lost its specific identity.
Geography
Chesterfield Township is in eastern Macomb County and is bordered on the north by Lenox Township and the village of New Haven; on the east by Ira Township in St. Clair County, and by the village of New Baltimore; on the southeast by Anchor Bay, which is a part of Lake St. Clair; on the south by Harrison Township; and on the west by Macomb Township.
According to the United States Census Bureau, the township has a total area of 30.6 square miles (79 km), of which 27.6 square miles (71 km2) are land and 3.0 square miles (7.8 km), or 9.85%, are water.
Much of Chesterfield Township is dominated by suburban subdivisions and shopping developments; its population is increasingly diverse, reflecting area demographic changes. In 2010 some 89% of the population identified as non-Hispanic whites; in the late 20th century, the largely rural township had an even higher percentage of whites. Anchor Bay influences the southeastern part of the community, where many pleasure boats, docks, and marine-related businesses can be found.
Communities
There are nine unincorporated communities in the township and no incorporated villages:
- Anchor Bay Gardens is located off Jefferson Avenue at Sunrise Street and Jans Drive (42°38′34″N 82°48′45″W / 42.64278°N 82.81250°W; Elevation: 571 ft./174 m.).
- Anchor Bay Harbor is located on Jefferson Avenue south of Anchor Bay Gardens, between Sugerbush and Cotton roads (42°39′19.1″N 82°47′56.7″W / 42.655306°N 82.799083°W; Elevation: 577 ft./176 m.).
- Anchor Bay Shores is located off Jefferson Avenue, south of Anchor Bay Harbor between William P. Rosso Highway and 21 Mile Road (42°38′08″N 82°49′00″W / 42.63556°N 82.81667°W; Elevation: 581 ft./177 m.)
- Chesterfield is located on M-3 from 23 Mile Road to 22 Mile Road. (42°39′46″N 82°50′33″W / 42.66278°N 82.84250°W; Elevation: 607 ft./185 m.)
- Chesterfield Shores is near the border with City of New Baltimore north of Jefferson Avenue and south of M-29/23 Mile Road (42°40′12″N 82°45′41″W / 42.67000°N 82.76139°W ; Elevation: 587 ft./179 m.).
- Fairchild was located in the southern portion of the township. It had a post office starting in 1906.
- Lottivue is located between Jefferson Avenue, Lake Saint Clair, Brandenburg Park and Schneider Road (42°39′34″N 82°45′43″W / 42.65944°N 82.76194°W ; Elevation: 577 ft./176 m.).
- Milton is located at Gratiot Avenue and 24 Mile Road (42°41′21″N 82°49′19″W / 42.68917°N 82.82194°W; Elevation: 607 ft./185 m.) and once was a station on the Grand Trunk Railroad. The first post office in the township was established here in 1837 in the house of Robert O. Milton, with the name of “New Haven Post Office”. When this was moved to New Haven, Alfred D. Rice established another post office in Milton. That post office closed at some point, and another was opened in January 1856, with Edmund Matthews as postmaster. This office operated until July 1904. Milton was home to a school, three churches, a doctor, a blacksmith, and a couple of saloons. The last saloon survived until 2004, when it was torn down, at that time it was known as the “Teddy Bear Bar.” The school, known as Milton School, was incorporated into another building, which was torn down in 2002.
- Point Lakeview is located southwest of Lottivue between the Salt River and Lake Saint Clair.
- Sebille Manor is located northwest of Anchor Bay Harbor between Sugarbush and Donner roads (42°39′40″N 82°48′44″W / 42.66111°N 82.81222°W; Elevation: 587 ft./179 m.).
Demographics
As of the 2010 census Chesterfield Township had a population of 43,381. The racial and ethnic composition of the population was 89.5% non-Hispanic white, 5.3% African American, 0.4% Native American, 1.0% Asian, 0.1% non-Hispanics from some other race, 1.8% from two or more races, and 2.4% Hispanic or Latino.
As of the census of 2000, there were 37,405 people, 13,347 households, and 10,076 families residing in the township. The population density was 1,341.7 inhabitants per square mile (518.0/km2). There were 13,967 housing units at an average density of 501.0 per square mile (193.4/km). The racial makeup of the township was 93.43% White, 2.97% African American, 0.40% Native American, 0.76% Asian, 0.02% Pacific Islander, 0.87% from other races, and 1.56% from two or more races. Hispanic or Latino of any race were 2.52% of the population.
There were 13,347 households, out of which 43.1% had children under the age of 18 living with them, 62.1% were married couples living together, 9.5% had a female householder with no husband present, and 24.5% were non-families. 19.2% of all households were made up of individuals, and 4.7% had someone living alone who was 65 years of age or older. The average household size was 2.78 and the average family size was 3.22.
In the township 29.8% of the population was under the age of 18, 7.9% from 18 to 24, 36.4% from 25 to 44, 19.3% from 45 to 64, and 6.6% was 65 years of age or older. The median age was 33 years. For every 100 females, there were 98.5 males. For every 100 females age 18 and over, there were 95.6 males.
The median income for a household in the township was $61,630, and the median income for a family was $69,554. Males had a median income of $50,834 versus $30,275 for females. The per capita income for the township was $24,410. About 3.9% of families and 4.7% of the population were below the poverty line, including 6.8% of those under age 18 and 3.8% of those age 65 or over.
Government
The township is governed by a board of trustees and a township supervisor. Heavenly Ann Frederick gained presidency in the 2020 election and still holds office.
Fire department
Chesterfield Township is served by a mix of career and part-time firefighters, under the direction of the Public Safety Director, and supervision of a full-time chief. The department staffs two stations 24/7.
Education
Chesterfield Township is primarily covered by two school districts: the Anchor Bay School District, and L’Anse Creuse Public Schools. A small portion of the northern part of the township is also zoned to New Haven Community Schools.
Contact Us Today for a FREE
Concrete Grinding Quote
Our Concrete Grinding services are available in Anchor Bay Gardens as well as all of Macomb County.
Our dedicated team at D&J Contracting Inc is at-the-ready to provide you with great customer service and first class Concrete Grinding services. Reach out to us at (586) 954-0008 to discuss your Concrete Grinding needs today!